Positively charged liposomes consisting of the KTTKS pentapeptide conjugated with rhodamine increase rhodamine toxicity in E. coli and zebrafish embryo

Liposomes composed of cell‐penetrating peptide derivatives increased transport across the cell membrane. Conjugating rhodamine to a cell‐penetrating peptide increased the toxicity of rhodamine in E. coli and zebrafish embryos. A similar total protein inhibition pattern with different intensities, indicating that the interaction pathways of the rho‐KTTKS‐CONH₂ monomer and liposomes were the same. It suggests that the rho‐KTTKS‐CONH₂ liposomes showed higher toxicity because better transport across the cell membrane increased the effective concentration inside cells. The staining of zebrafish embryos using rho‐KTTKS‐CONH₂ liposomes showed a longer retention time, suggesting that it can penetrate deeper tissues or organs in zebrafish.     

DNA G-四链体的结构完整性对催化性质的影响

DNA酶中的G-四链体-血红素(G4-hemin)DNA酶结构具有较高的设计性和化学稳定性,因此格外受研究者关注.G-平面作为辅酶因子hemin的结合位点,不仅提供大π平面与hemin结合,而且其平面上的G碱基还可以充当近端配位基团与hemin进行配位.因此,研究G-平面完整性在G4-DNA酶体系中的作用具有重要意义.本文设计了一系列含有空位的G4(G-vacancy,GV)及G-三链体,通过“鸟嘌呤类似物插入”策略实现G-平面完整性以及DNA酶催化活性的恢复.结果表明,末端G-平面完整性是G4-DNA酶具有催化活性的必要条件,且其能够充当近端配位基团与末端碱基协同激活G4-DNA酶.考虑到hemin会选择性地结合于G4的3’-端平面,本文以含有3’-端空位的G4以及G-三链体为模型进行DNA酶的构建.结果表明,相较于末端完整的G4-hemin DNA酶,末端不完整的G4结构所形成的DNA酶催化活性很低.为了进一步验证该平面完整性的重要性,本文提出了“鸟嘌呤衍生物插入”策略,即将鸟嘌呤衍生物(无环鸟苷和鸟苷)插入G-空位以恢复G-平面的完整性.通过圆二色光谱和紫外熔解实验,发现末端平面完整性的缺失会使圆二色特征峰信号和G4结构热稳定性下降,而鸟嘌呤碱基类似物的加入则可以使特征峰信号以及热稳定性得到一定程度的恢复,表明鸟嘌呤碱基类似物的加入确实使G-平面完整性得到恢复.与此同时,随着鸟嘌呤碱基类似物浓度的增加,G4-hemin DNA酶活性逐渐增强,最终恢复至与完整G4一样的活性.在以G-三链体为模型的实验中,本文通过另一条富G序列与G-三链体进行结合,形成复合的(3+1)型G4结构,最终实现了DNA酶活性的恢复.同时,在3’-G-平面末端增加了激活碱基(dA或dTC),结果表明,即使G-平面不完整,末端碱基依旧能够激活DNA酶,但酶活性整体弱于完整G4时的活性.同样,“鸟嘌呤衍生物插入”策略可以使酶活性得到恢复.本文系列实验充分说明了末端碱基可与G-平面形成协同作用,与hemin的铁中心共同形成六配位关系,加速催化中间体生成,进而增强催化活性.有趣的是,通过设计Holliday junction结构研究发现,“鸟嘌呤衍生物插入”策略仅适用于平行G4结构.G-空位的存在不仅降低了G4结构的稳定性,而且降低了其与hemin间的亲和力,二者均是造成G4-DNA酶催化能力下降的主要因素.总之,本文证明了3’-端G-平面的完整性是G4-DNA酶实现其催化能力必不可少的因素,对理解末端G-平面在G4-DNA酶中的作用具有重要的参考意义.     

Mixing of Racemic Poly(L-lactide)/Poly(D-lactide) Blend with Miscible Poly(D,L-lactide):Toward All Stereocomplex-type Polylactide with Strikingly Enhanced SC Crystallizability

Stereocomplex-type polylactide (SC-PLA) consisting of alternatively arranged poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) chains has gained a good reputation as a sustainable engineering plastic with outstanding heat resistance and durability,however its practical applications have been considerably hindered by the weak SC crystallizability.Current methods used to enhance the SC crystallizability are generally achieved at the expense of the precious bio-renewability and/or bio-degradability of PLAs.Herein,we demonstrate a feasible method to address these challenges by incorporating small amounts of poly(D,L-lactide) (PDLLA) into linear high-molecular-weight PLLA/PDLA blends.The results show that the incorporation of the atactic PDLLA leads to a significant enhancement in the SC crystallizability because its good miscibility with the isotactic PLAs makes it possible to greatly improve the chain mixing between PLLA and PDLA as an effective compatibilizer.Meanwhile,the melt stability (i.e.,the stability of PLLA/PDLA chain assemblies upon melting) could also be improved substantially.Very intriguingly,SC crystallites are predominantly formed with increasing content and molecular weight of PDLLA.More notably,exclusive SC crystallization can be obtained in the racemic blends with 20 wt％ PDLLA having weight-average molecular weight of above 1 ×10s g/mol,where the chain mixing level and intermolecular interactions between the PLA enantiomers could be strikingly enhanced.Overall,our work could not only open a promising horizon for the development of all SC-PLA-based engineering plastic with exceptional SC crystallizability but also give a fundamental insight into the crucial role of PDLLA in improving the SC crystallizability of PLLA/PDLA blends.     

Analysis of the Thermal Decomposition Path of SF6 on the Surface of Cu and its Oxides

Plasma Chemistry and Plasma Processing - Accurately grasping the decomposition path of SF6 on the surface of typical metals and metal oxides is the key to reveal the decomposition mechanism of...     

Cyclized oligomer of tetracyanoquinodimethane-tetrathiafulvalene (TCNQ-TTF): a versatile macrocyclic molecule by DFT calculations

Journal of Inclusion Phenomena and Macrocyclic Chemistry - The combination of the electron donor and acceptor into a donor–acceptor system can transform the intermolecular charge transfer...     

Separation of heart rate variability components of the autonomic nervous system by utilizing principal dynamic modes

This work introduces a modified Principal Dynamic Modes (PDM) methodology using eigenvalue/eigenvector analysis to separate individual components of the sympathetic and parasympathetic nervous contributions to heart rate variability. We have modified the PDM technique to be used with even a single output signal of heart rate variability data, whereas the original PDMs required both input and output data. This method specifically accounts for the inherent nonlinear dynamics of heart rate control, which the current method of power spectrum density (PSD) is unable to do. Propranolol and atropine were administered to normal human volunteers intravenously to inhibit the sympathetic and parasympathetic activities, respectively. With separate applications of the respective drugs, we found a significant decrease in the amplitude of the waveforms that correspond to each nervous activity. Furthermore, we observed near complete elimination of these dynamics when both drugs were given to the subjects. Comparison of our method to the conventional low/high frequency ratio of PSD shows that PDM methodology provides much more accurate assessment of the autonomic nervous balance by separation of individual components of the autonomic nervous activities. The PDM methodology is expected to have an added benefit that diagnosis and prognostication of a patient's health can be determined simply via a non-invasive electrocardiogram.     

On the Dynamical Rayleigh-Taylor Instability

The classical Rayleigh-Taylor instability is shown to be valid in a nonlinear dynamical sense for smooth density profiles. (Accepted September 23, 2002) Published online February 26, 2003 Communicated by Y. Brenier     

共线式热电发电机在侧面散热情况下的性能

热电材料是一种环境友好型功能材料,其可以实现热能与电能的相互转化,在热电发电、热电制冷中具有许多应用.传统的热电发电机为$\pi$型结构,要求热电腿的长度相等,在某些情况该结构不利于热电发电机的优化设计.热电发电机在高温工况下会引起强烈的热应力甚至应力集中,从而缩短了其工作寿命.另外,热电发电机的工作温度于环境温度,这样必然会有一部分热量散失到环境中,从而影响热电发电机的性能.针对该现象,本文建立了考虑散热的新型共线式热电发电机模型,该模型的热电腿可以独立进行优化,基于有限元方法,对考虑侧面散热的共线式热电发电机进行了仿真模拟,分析了其在狄利克雷边界条件下的热电性能和力学性能,得到了热电发电机的温度场、电势场、应力场,探究了不同强度的对流散热系数对热电发电机热电性能和力学性能的影响.结果表明,对流散热会降低热电发电机的能量转化效率,当对流换热系数达到~100W/(m$^{2}\cdot$\textcelsius) 时,效率为~0.0479,该值比绝热状态的转化效率0.066 7 低28%.对流散热使热电发电机侧面热损失增加,降低了热应力.在实际应用中,应合理优化设计隔热系统,提高能量的转化效率.      

Synthesis and characterisation of photopolymerisable liquid crystals based on the π-extended fluorene core and their corresponding non-reactive analogues

We have synthesised a series of new reactive mesogens with photopolymerisable di-acrylates and their corresponding non-reactive analogues based on the π-conjugated aromatic core, fluorene (F)-di-[thiophene (T)-benzene (B)], using the Stille and Suzuki coupling reaction. The effect of lateral alkyl chains on the 9-position of the central fluorene moiety as well as α, ω- side alkyl chains attached to the π-conjugated aromatic core on the mesomorphism was investigated by utilising differential scanning calorimetry (DSC) and polarising optical microscopy (POM). A wide angle X-ray scattering (WAXS) study at the various temperatures was also carried out to reveal phase structures. Photopolymerisable di-acrylates connected directly to the rigid aromatic core showed higher phase transition temperatures, probably due to the induced dipole moment in comparison with those of a non-reactive methyl–ether counterpart.     

Site‐specific reversible immobilization and purification of His‐tagged protein on poly(2‐acetamidoacrylic acid) hydrogel beads

Ni²⁺‐complexed poly(2‐acetamidoacrylic acid) (PAAA) hydrogel beads were developed for the site‐specific reversible immobilization and purification of the histidine‐tagged green fluorescent protein (His‐tagged GFP). PAAA hydrogel beads were prepared by photopolymerization, and significantly improved mechanical properties of PAAA hydrogel beads were observed in comparison with PAAA hydrogel from our previous study. Confocal laser scanning microscopy was used to determine the binding of His‐tagged GFP to the hydrogel beads in three‐dimensional space. Photoluminescence spectroscopy revealed 89% of binding efficiency of His‐tagged GFP to the Ni²⁺‐PAAA hydrogel beads, 51% of yielding recovery. The maximum binding capacity of His‐tagged GFP was estimated to be 0.45 µg/mg of Ni²⁺‐PAAA hydrogel beads. The recombinant His‐tagged GFP from the soluble fraction of E. coli BL21(DE3) cell lysates was purified with Ni²⁺‐PAAA hydrogel beads. The major advantage of the Ni²⁺‐PAAA hydrogel beads system was simple preparation procedures of producing the matrix, because PAAA hydrogel beads had relatively enhanced mechanical strength than soft hydrogels. Copyright © 2012 John Wiley & Sons, Ltd.